Camel ADV Yamaha Tenere 700 25-26 Rally Bend Standard Muffler High Mount Exhaust Kit

CAMEL ADV HIGH EXHAUST KIT

The Rally Bend System looks and sounds amazing. It's located low and wide and is mounted on a very long exhaust hanger that's welded to the subframe. When the bike is dropped on the right side, the mount can be bent which allows the muffler to be pushed into the side of the swingarm. If it is not bent back before being ridden, the aluminum swingarm gets chewed up by the steel muffler. Adding insult to injury, if you bend the hanger enough times, it can crack at the subframe. 

Having experienced the bent hanger and torn up swing arm personally, Camel ADV came up with a new exhaust system the places the muffler up much higher and closer to the bike's centerline... out of harm's way. To achieve this, they had to make a new link pipe and a new bracket to shorten the very long stock muffler hanger which greatly reduces leverage it sees making it much less likely to be bent in a drop.

FEATURES

• TIG-welded, 304 stainless, "Lobster-Back" link pipe with wire heel guards for the rider and pillion.
• Our anodized CNC billet 6061 aluminum clamp. This mounting bracket is simple to install and reduces the hanger length (and leverage by about 50%). *Patent Pending*
• A stainless muffler .These new mufflers sound great, are robust, and use a clamp rather than springs to attach to the link pipe.
• All fasteners, springs, exhaust clamp, graphite seal, and Camel ADV decals.

PANNIER COMPATIBILITY

• Outback Motortek
• Yamaha OEM 
• Touratech Zega
• SW Motech PRO
• Ride ADV Solo racks
• Rally Raid soft bag plates
• ADV Spec soft bag plates (require 17mm spacers and longer bolts)
• 2nd Gen Outback Motortek Symmetrical and Asymmetrical racks (not compatible with Outback's "High Exhaust" specific racks)
• Mosko Moto Reckless series
• Giant Loop