Camel ADV Yamaha Tenere 700 V2 Enduro Tip Rear Brake Pedal
With rigorious testing the Camel ADV engineers have found the issue with a spongy rear brake is not swelling of the OEM rubber brake lines or the compound of the brake padsor the design of the master cylinder or caliper.
Features:
- Corrected leverage ratio reducing pedal travel by half compared to stock
- Durable 6.4mm thick 304 stainless steel construction
- Straighter shape to reduce pedal flexing while braking
- Brass bushings to reduce slop in the pedal main pivot point
- Grippy, replaceable stainless steel brake tip
- Offset clevis to correct the master cylinder pushrod angle
- Black powder-coated finish
- Enduro tip: Approx 35mm wide
- Street tip: Approx 57mm wide
- Folding tip: Approx 55mm wide
V1 or V2? Which is for you?
The V1's flatter profile has less flex through the pedal when applied, but it cannot be adjusted low enough to be used with lowered footpegs.
The V2's high OEM-style arch offers plenty of room for adjustment down when using lowered footpegs. The higher arch also means it will flex a bit more when you apply pressure to the pedal.
Both pedals offer the same leverage ratio correction, and both pedals flex far less than the OEM mild steel pedal.
The V1 pedal is not recommended for use with lowered footpegs!
This product has no reviews yet.
Shipping — Flat-rate $10 standard shipping Australia wide. Same-day dispatch on in-stock items ordered before 2PM AEST on weekdays.
Returns — 60-day no-hassle return or exchange policy.
Shop now, Pay later
Four payments of $82.49
Online
Delivery — Flat rate $10 standard shipping Australia wide
Sydney · Brisbane
In-store stock shown at checkout
With rigorious testing the Camel ADV engineers have found the issue with a spongy rear brake is not swelling of the OEM rubber brake lines or the compound of the brake padsor the design of the master cylinder or caliper.
Features:
- Corrected leverage ratio reducing pedal travel by half compared to stock
- Durable 6.4mm thick 304 stainless steel construction
- Straighter shape to reduce pedal flexing while braking
- Brass bushings to reduce slop in the pedal main pivot point
- Grippy, replaceable stainless steel brake tip
- Offset clevis to correct the master cylinder pushrod angle
- Black powder-coated finish
- Enduro tip: Approx 35mm wide
- Street tip: Approx 57mm wide
- Folding tip: Approx 55mm wide
V1 or V2? Which is for you?
The V1's flatter profile has less flex through the pedal when applied, but it cannot be adjusted low enough to be used with lowered footpegs.
The V2's high OEM-style arch offers plenty of room for adjustment down when using lowered footpegs. The higher arch also means it will flex a bit more when you apply pressure to the pedal.
Both pedals offer the same leverage ratio correction, and both pedals flex far less than the OEM mild steel pedal.
The V1 pedal is not recommended for use with lowered footpegs!
This product has no reviews yet.
Shipping — Flat-rate $10 standard shipping Australia wide. Same-day dispatch on in-stock items ordered before 2PM AEST on weekdays.
Returns — 60-day no-hassle return or exchange policy.